Burnless brick machine equipment maintenance skills

Burnfree brick machine equipment can produce a variety of brick products, it is because of the credit of the mold. Equipment maintenance skills, mold quality problems directly affect the quality of brick products, so the mold process using infiltration heat treatment workers

Burnfree brick machine equipment can produce a variety of brick products, it is because of the credit of the mold. The quality problem of the mould directly affects the quality of the brick products, so the mould process uses the infiltration heat treatment process, and the gap between the upper and lower mould is uniform. This makes it possible to produce a wide variety of brick products. Next, Lei Shi Chengxin Xiaobian mainly shares with you the mold process and use skills of the non-burning brick machine equipment.


There are certain requirements for the operators of the die process of the unburned brick machine equipment. The staff should have certain knowledge of the brick machine in the aspects of the die material, replacement and operation.

First of all, the unburning brick machine equipment mold uses a unique combination of mold structure, such as pressing foot, wear need to change parts, save mold expenses. During equipment commissioning, first will join the gear reducer as required, the lubrication parts, injection of lubricating oil, test for a conform to the requirements of the electrical power supply (three-phase 380 v), after being checked, connected to the power supply, whether between debugging molding box and die head up and down first, see whether jam phenomenon such as friction, when we have to adjust lei Shi Chengxin baking-free brick machine equipment maintenance skills, until the up and down freely.

In die working process, the staff need to debug mold, and the material release mixer. Then start the motor baking-free brick machine equipment, when linked up to two bite stop, put appropriate wooden plate in vibration platform, and then start the boost motor, the mould on to wood pallet stop, then the mixing material with spade shovel into the molding box, reliable enough, start vibration under 3 to 5 s stop, then target will die box feeding cloth flat materials, excess material with a rake to the ground, the drop-down decoupling controller, die free fall, start up and down on both sides of the vibration motor limit card card into stop vibration, such as vibration completely disappear, Start the lifting motor, wait for the hook interlocking motor to stop, and transport the finished unburned brick with the pallet by forklift. The cycle is completed.

Mold is used to shape the tool of the article, this tool is composed of a variety of parts, different molds by different parts, it mainly through the physical state of the material to achieve the shape of the article processing. The mould selected by the non-burning brick machine equipment has the characteristics of wear-resistance, durability and oxidation resistance, so after use, the staff also need to clean the mould in time, lubricate the mould regularly, and often smear some lubricating oil to prevent rust, so as to prolong the service life of the mould itself.

There are a variety of options for the brick machine equipment mold, and each test machine needs to do a good job in the early inspection before running. In the daily use of free brick machine Lei Shi Chengxin equipment maintenance skills, the use of the mold is very familiar to the operator, only the continuous maintenance of the mold and improve the operating process can improve its service life.